Discuss Ripped off by cowboy in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Not sure I understood your last question, Midwest. The other wall has electrics on it but I left it out for now because it’s passable.

The existing installation has to be adequate for the new alteration or addition, which includes earthing & bonding. In my experience with some kitchen refurbs I did, some additional works were required. Not impressed with whats been done here, so not confidant your existing install has been checked for its suitability.
 
If I find someone, can you advise on specific, clear instructions to conclude the job ASAP?

No we can't basically. You need to source a suitable competent electrician. The use of web sites such as Check a Trade etc etc, do not vouch for competency. Not the Schemes can validate competency, but at least they verify qualifications, insurance, test equipment etc.

Competent Persons Register | Home - https://www.competentperson.co.uk/

Word of mouth, is another good route in choosing a trades person.
 
Guys,

The 2nd electrician has done a runner. He did not turn up today. Despite confirming on whatsapp on Thursday and despite new chasing having been instructed based on his new requirements.

Both electricians were sourced via mybuilder.

I am cornered and need to move quickly.

What’s the least amount of work necessary to finish this job?
Maybe you are just hard work and both have realised that. The least amount of work is a kitchen rewire, not bodging about with the existing wiring.
 
The existing installation has to be adequate for the new alteration or addition, which includes earthing & bonding. In my experience with some kitchen refurbs I did, some additional works were required. Not impressed with whats been done here, so not confidant your existing install has been checked for its suitability.

The entire flat has been EICR’ed and it’s fine.
 
Maybe you are just hard work and both have realised that. The least amount of work is a kitchen rewire, not bodging about with the existing wiring.

Let’s not have a client vs trade battle here.

Define “hard work” — yes, I am looking for a discount on your quote and yes I do ask you to repeat the information you stated. Professionals are used to being questioned, people with a chip on their shoulder can’t handle it. They start pulling a fast one and try to deceive and trick and fool.
 
No we can't basically. You need to source a suitable competent electrician. The use of web sites such as Check a Trade etc etc, do not vouch for competency. Not the Schemes can validate competency, but at least they verify qualifications, insurance, test equipment etc.

Funny you say that, Midwest, because if you look up in the earlier posts, you’ll find people taking me to task on how well I instructed. I do think that absolute clarity in the instruction is very useful.
 
Well if hes on checkatrade complain to them about him. They will take him off the site and might stop him fleecing others.

Is that the stance they take in reality?
I thought that, like many advertising schemes posing as public services, provided you keep paying your £70/month (or whatever they charge), they stay happy unless of course they get hundreds of adverse feedbacks, or a feature on Watchdog. Maybe wrong, but doubt it somehow.
 
Let’s not have a client vs trade battle here.

Define “hard work” — yes, I am looking for a discount on your quote and yes I do ask you to repeat the information you stated. Professionals are used to being questioned, people with a chip on their shoulder can’t handle it. They start pulling a fast one and try to deceive and trick and fool.
What are you jabbering on about now?
 
Define “hard work” — yes, I am looking for a discount on your quote and yes I do ask you to repeat the information you stated.

Some people will over-price so as to be able to give a discount. I don't, I've just never liked working that way. You might find this approach puts some people off. If someone tells me they have found someone cheaper, I usually advise them to go with the cheaper quote if they are happy with it.
 
Define “hard work” — yes, I am looking for a discount on your quote and yes I do ask you to repeat the information you stated. Professionals are used to being questioned, people with a chip on their shoulder can’t handle it. They start pulling a fast one and try to deceive and trick and fool.
Out of interest, why would a sparks want to give you a discount for rewiring a small kitchen? If you were a regular customer and a sparks is looking after half a dozen rental properties for you too, or there is another bigger job coming up, then possibly. Otherwise no, there's no shortage of good work in London, no discounts on parking and no discounts on fuel, despite buying it from the same garage 2 or 3 times a week.

There's also a fine line between questioning a trade to reasonably understand something as a customer/consumer/end user may find useful, and questioning to the point of doubting a professional tradesman and becoming a bloody nuisance in the process.

You mentioned early on you cut code. I'm sure if one of your customers kept debugging your C++ files and questioning aspects of how and why you've coded in a particular way, you'd quickly get arsey about it.

Treat the trade as you like to be treated yourself, then you'll find 99% of people you meet will be genuine, helpful and go the extra mile to ensure you're satisfied with their work.
 
sometimes clarity can be taken for interfering. just find a sparks and tell him to put it right, then get out of his way.

That’s unprofessional and I doubt the regulating bodies recommend such “get out of the way” advice.

My idea of a professional is that they understand their job well and CAN handle questions and respond well to clarity of instruction.
 
Out of interest, why would a sparks want to give you a discount for rewiring a small kitchen? If you were a regular customer and a sparks is looking after half a dozen rental properties for you too, or there is another bigger job coming up, then possibly. Otherwise no, there's no shortage of good work in London, no discounts on parking and no discounts on fuel, despite buying it from the same garage 2 or 3 times a week.

There's also a fine line between questioning a trade to reasonably understand something as a customer/consumer/end user may find useful, and questioning to the point of doubting a professional tradesman and becoming a bloody nuisance in the process.

You mentioned early on you cut code. I'm sure if one of your customers kept debugging your C++ files and questioning aspects of how and why you've coded in a particular way, you'd quickly get arsey about it.

Treat the trade as you like to be treated yourself, then you'll find 99% of people you meet will be genuine, helpful and go the extra mile to ensure you're satisfied with their work.

All wonderful points. Let me take’em one by one.

Whether you like it or not, there’s HUGE disparity in quotes for the same job by trades. I am not a professional landlord, I am a first time buyer and am renovating the flat. I am not sitting on a big heap of dough nor am I going to get my money back by tagging onto the rent. Anyone who respects themselves will negotiate and try to get the best deal. There is HUGE disparity between your quotes, guy. Cannot repeat this enough.

I do question. I don’t interfere. I am not trying to cast doubt until I SEE evidence of it. I do pay attention to goings on.

I personally would love it if people sat next to me and double-checked my code. Not while I am coding but afterwards is absolutely fine. And I promise you I won’t throw a fit if they point at inconsistencies or say something is missing or not done at an adequate standard. But many of the trades that I encountered blabber on immediately about costing extra haven’t got all day and other stuff that does show them for their true colours. Many trades are not aware that we clients/customers are putting our lives/money/safety/aesthetics in their hands. They don’t give a ----.
 
No one is ganging up on anyone, from your pics the work currently undertaken is verging on DIY capability so you either need to address this or draw a line under it. Move on and find an electrician who will start from scratch but detail your requirements from the offset then leave them to it.
 

Reply to Ripped off by cowboy in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock