Doing a self build project, have mounted most of the back boxes and have plans but running out of time to do all 1st fix myself!
Have approx 1 week of work running cables, mounting back boxes. Have plans drawn up, no qualifications needed, just need someone to do a neat and tidy job!
I own two flats with a small common lobby. Although operable from both flats, the common lobby light appears to be wired to flat A's circuit. Rather than fit a landlord's common area meter and circuit, I am thinking of having flat B's lobby switch professionally disconnected from A's circuit...
Welcome to Accelleo! We are excited to present an excellent opportunity for Electronic Engineers to work within the Security and Defence space.
Job Brief:
The Electronics Engineer will be responsible for research, design, and development of digital and analogue electronics within the hardware...
DIYer here. I'd like to install an electric car wall charger myself. It calls for 6/2 romex which I have. Unfortunately my panel is in my basement on the opposite side of the basement from my garage. AND my basement is finished (drywalled ceiling). The finished walls are metal studs and...
Mate with site experience, 18th edition, ECS, 2365 own tools and transport looking for work around the North-East willing to travel. If interested message me for more info.
Thanks
Steel columns for building into concrete… no inter- connection of Beams … Wooden beams used for interlinked supports … would MBPC be required to each column…
Hi, we are recruiting electrical subcontractors for a potentially substantial testing job in a couple of weeks.
Our clients requirements are to have a DBS (basic is fine), and City and Guilds 2391 in Inspection and Testing (or equivalent).
Day rates are negotiable depending on experience...
Afternoon everyone..
During some testing I have found an IR reading of 0.01MΩ between N-E. This is on a length of SWA buried underground from the main consumer unit in the house to a garage consumer unit. The poor readings are not on the outgoing circuits in the garage.
There must be a join...
I have completed level 3 C&G electrical installation course and I'm looking for an apprenticeship opportunity, or if anyone knows of any companies currently seeking an apprentice around Liverpool area.
Hi everyone, I'm looking for work as a mate, I have a recently achieved a
City & guilds level 3 in electrical installations (2365). I already had level 2,
PAT testing (2377),
Part P buildings regulations,
18th Edition BS7671
ECS card.
I'm hard working and honest and for 4 years i have been...
Good evening all.
Have a potential domestic job for a few days for a friend of a friend in Basingstoke and would like to find out how much the people charge in the area, if there's anyone from around there. I'm based in West Midlands so I think the rates for that area should be different, plus...
Hi,
I work for a company that is currently interested in recruiting an Electrician to be based from home and cover the M32/M4/M48/M49/M5 corridors and other motorway areas in the South of England. 17th/18th Edition with some Testing knowledge is desirable. PM if interested and 'll send you a...
Trying to find out if a relative (2nd cousin ) has passed away .He was a recluse late 80's , no phone etc .Cannot really find anything on Obituaries etc etc .
Hi Everyone,
Looking for an opportunity as an electricians mate, with the aim of gaining my NVQ and AM2.
I have recently got my Level 2 & 3 2365 Diplomas, also have 7671 18th edition, Building Regs, and 2392 inspection and testing certs.
I have my own basic tools, a driving licence and vehicle...
Hi, Looking for job as an Electrician Mate in the West Midlands / Staffordshire area. Over 15 years experience, ECS card and NVQ Level 2.
Domestic installation and Maintenance ( 1st and 2nd Fix).
Roydel
Looking for an Electricians mate to join our team that is will in to progress in there field
we carry out small installs, ppm, testing and reactive works
most work is commercial and based within the M25 corridor
contact for more details
Looking for an experienced Electrician to join our team
we carry out small installs, ppm, testing and reactive works
most work is commercial and based within the M25 corridor
contact for more details
Hi,
I've recently done a Level 2&3 Electrical Installation course, and since come to the quick conclusion it's not worth the paper it's printed on. I know lots about hysteresis, and not very much about wiring up a house! I'm looking to work with a spark around the Dartford area so I can learn...
Hi All,
What's your thoughts on this. If you have a 2.5mm radial bunched in with a ring main on a 32a breaker then that's a C2 but you can spur off a ring main out in the field no problem...
What's the difference ?
Hi
I am looking for work experience in the Sheffield / Rotherham areas.
I am nearing the end of my City and Guilds 2356 Level 2; planning to do Level 3 next.
Coming from an IT web app development background - looking to take up electrical work full time. I do have networking / cabling...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.