bell

  1. S

    CSU Mounted or DIN Rail External 24V Bell Transformer

    Any recommendations?
  2. A

    Adding a wired bell (with transformer) to a 2 way intercom

    Hello folks, I'm just your standard 'diy'er! I don't seem to be able to achieve the above, can anybody give me some pointers? We have an existing 2 way intercom which goes to only one part of the house. we want to add a wired doorbell (Byron 766 inc transformer) so the rest of the house gets a...
  3. M

    Swapping over alarm bell box

    Hi there. I swapped over my bell box a couple of days ago with an AG6. The terminations were slightly different from the old one. The bell is working as it should. What I have noticed is happening since I changed it over is sometimes when I open the back door which has a door contact on it...
  4. C

    Ring door bell install

    Installing a door bell which needs a 24vac supply. I normally use the din rail ransformer however the client want this door bell supplied from the local plug top. I can find plenty of AC24v plug in supply units however none of the leads are long enough. I would like to chop the plug, crimp and...
  5. crooksy88

    Accenta G4 external siren only sounds on bell test

    Hi, I have an Accenta G4 8SP399A with a single LCD keypad. Everything seems to be working correctly other than the external bell doesn't sound when the alarm is triggered, the strobe lights do light up though. If I do a bell test via the engineers menu the external bell does sound. Would...
  6. tharetard

    Transformer from CU to door bell (Ring Pro)

    Hi guys I need some advice with cable routing. I'm planning on buying a Ring Pro doorbell (https://www.amazon.co.uk/Ring-Video-Doorbell-Chime-Transformer/dp/B01DM6BDA4) and installing it on a new build house. There is currently no doorbell installed (it was a completely insane cost to get...
  7. L

    BELL WIRE FOR RING PRO DOOR BELL

    HI GUYS AND GIRLS, LOOKING TO INSTALL A RING PRO DOORBELL WHICH IS POWERED BY A 3 PIN UK TRANSFORMER NOT FROM A CU . MY QUESTION IS WHAT BELL WIRE TO USE PLEASE. REGARDS LEE
  8. S

    Attached bell wire to rendered external insulation

    Hi. I'm pricing up a job. I need to run bell wire up the outside of a newly rendered and externally insulated house. Never touched this before and I'm worried the clips won't fix in securely or will damage it. Is this the case? Any one got any experience /tips? Thanks.
  9. Lou

    Shaun Bell Electrical

    Shaun Bell Electrical ltd has is happy to announce that we have now been trading for 13 years and have an excellent track record, still priding ourselves on providing the highest standard of work catering for domestic, commercial and industrial clients, the company has steadily grown over the...
  10. M

    Home Control panel & Bell Box

    hello would just like to say thank you to all for your help, being doing electrical work for years now retied which i like even better, now just playing with trains, anyway would like a bit more help please. I have now sorted my sons alarm out now working great, his next door neighbor has got me...
  11. M

    Can I wire up a Honeywell AG6 Alarm bell box with only 4 cores?

    Replaced panel and would now like to replace Bell box. Using Existing wiring, it has two cores from bell box wire to an individual zone, so only 4 Spare cores available at bell box. I cannot even find the possible 'zone/pir/panic button' to check the wiring at it. Can anyone help me...
  12. N

    WIFI Door Bell

    Hi guys Merry Christmas I have an E Prance WIFI door bell system but the batteries hardly last a week, the bell takes 3 x AAA batteries, Can I connect a mains to 4.5 volt DC transformer onto the bell without blowing the thing up. Many thanks Nick
  13. T

    Eicr None Labelled Consumer Unit.

    How much do most people allow per circuit for an EICR. Normally houses and small offices. Also where do you stand on labelled consumer units. Went to an office the other day, had about 7 ring mains, 10 lighting circuits, radials. NONE Labelled. How long do you spend trying to find which...
  14. W

    External Bell Box Not Sounding

    Hi All I moved into a new property last year which was fitted with an accenta g3 house alarm however the previous owner damaged the panel and it was on tamper lockout. I went online and made a few enquiries before purchasing the accenta g4 panel and lcd keypad. I took photos of the old panel...
  15. E

    Newbie: Bellchime Question - Help Required

    Hi There, I just moved into a new-build house and changed the 6v bell chime and transformer to a Wired Belron 776 with built in 8v transformer. (pic attached) 1 Having now got an 8 V Transformer Set Up. I want to now upgrade my doorbell to the Ring Video Pro. I learned today that this...
  16. S

    How much capacity of a labelling machine is good?

    How can we decide that the capacity is good of labelling machine? what should it be?
  17. C

    connection a odyssey 1 bellbox to a paragon control panel

    could anyone give me some advice on connection of a odyssey 1 bell box to a paragon super alarm panel. odyssey connections are, A 12v B Bell C tamper...
  18. S

    Spot light install above a pot belly stove

    Has any one installed spots lights above a pot belly stove ,my fear is the heat will affect the led spots and even to a certain degree the cables may get affected above the ceiling Im installing a small mf ceiling to allow for spots I have attached a pic of setup minus mf celing which I will...
  19. R

    PAT Test MInibelle mixer?!

    Hi All I have recently qualified as a PAT tester, for doing in house stuff for a building company. Does anyone know how to PAT test a cement mixer with a magnetic start? I was told on my training course that you could buy an adaptor for such purposes but I have drawn to a blank where to get...
  20. N

    Wireless Fire Alarm extension bell

    We have an extensive fire alarm system here, regularly maintained, and we're seeking to add an extension bell to our camp-site, where it would be useful to wake people up in the event of a fire in the house. This is not a statutary requirement just something that it would be handy to have. This...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock