Hi, my wife and I have decided to bite the bullet re the costs of an electric combi boiler in an off-gas grid one bedroom flat where space is so tight we need to get the old LPG boiler out of the kitchen and have an electric combi in an internal cupboard.
Questions: we are looking to get an...
Can I supply my central heating (programmer, two port valves and boiler) via a fused spur taken from the immersion heater circuit?
They’re currently supplied from a fused spur taken off the ring main; however, kitchen wall’s are being moved around.
There is nothing else on the immersion...
I'm following a spark who used an existing Panel Heater circuit, for new gas boiler circuit 6 months ago. The panel heaters were removed, so it's now a dedicated boiler circuit. I'm doing an EICR.
I've found a number of faults;
1. No grommet in Consumer unit knock out, used for gas bonding (It's...
Good morning Guys
Looking for some advice with regard to a current job.
Building company I'm doing work for are installing Electric heating on a property.
Customer has no access to Gas so there are 2x 9kW Electric boilers being installed. (Plumbers and Builders...
Having wired in parallel with my cordless programmable room stat an Alexa compatible wifi switch which has failed.
I want to have a app controlled/Alexa compatible switch for switching on my heating system when outside my home or very early in the morning etc, what do people recommend.
I had...
My boiler is still working fine and my new Hive thermostat works manually (just not on the app).
The boiler regardless of what’s happening still shows the A21 fault which I believe is an RF signal fault? Any ideas?
Hi all
Mate of mine is getting a new utility room fitted, the kitchen fitting company have brought in their electricians for first fix and to be fair they've done a good job, neat chasing, capping used, all cables in zones etc. They've also had to chase in the boiler feed which was in surface...
It has become a common occurrence that my boiler is failing to respond when the thermostat kicks in.
I hear an audible click from the heatlink when thermostat is turned up but nothing else happens.
Our heating programmer next to the water cylinder is set to continuous and all looks OK.
The...
It's a worcester combi boiler with heating / hot water connected to the low rate economy 7. There is a nest thermostat controlling the temperature. The issue is that the heating is not very controllable.
Should I get the boiler moved from low-rate ecomomy 7 to the high rate so it will be...
Hi people, I’m new to the forum, first post so here goes.
I’m wiring a heating control system and at the moment the customer wants as follows;
A JG underfloor heating system, this will be controlled by wireless thermostats, there is a 2 port valve and a wiring centre for the underfloor heating...
Hi.
We are looking at installing a Wiser smart heating system inc. trvs
We are currently electric only, with normal rads and a Heatrae sadia electromax combi boiler doing hot water and central heating duties.
Control is via a danfoss tp5000 battery programmable thermostat. This is only a two...
Hi, the circuit is pretty simple however shouldn't the boiler also have a permeant feed for the hot water as terminal 3 is the switch line for central heating?
Hello,
I'm hoping someone can help. I've been told I have to do a electric boiler service and I honesty have no idea where to even start.
I made my feelings clear about it, but it's unsurprisingly fell on deaf ears.
Is this something that I should even be doing (only lv3 & 18th qual) first, and...
Hello all
Looking for some electrical advice if possible. We had a boiler and complete new central heating system installed in our house 3 years ago. This has been working fine until recently when we had a new consumer unit with rcd protection installed to upgrade.
From the day this was...
What is everyone's opinion on taking a combi boiler supply off the lighting circuit? I doubt the boiler would pull more than 300 watts and with all the led lamps being used on the lighting circuit,I doubt it would come to more than a couple of hundred watts.A 3 amp fuse in the boiler spur would...
Hi everyone…I have a quick query regarding an issue I’m having with my boiler at home. There has been no hot water, the electrician has come out and diagnosed that the supply from the main fuse board has blown the clock and fuse spur. They also found that the cable is a flex cable and not the...
I'm sure this question has been asked to death, so apologies! But just wanted some direct confirmation that my intended wiring setup is going to be completely fine/not fine.
I'm currently planning on having my combi boiler relocated to a kitchen cupboard prior to a kitchen remodel. There is...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.