existing

Recent contents Top users
  1. Dartlec

    How to protect existing 16mm T&E feed to CU when converting to sub main at source

    Currently quoting for a job that needs to be done next week and working out how best to proceed, so thoughts welcome. Current situation: -->PME incomer that has just been moved by UKPN within a porch (brick built permanent type) from one wall to another. -->60A main fuse -->Meter -->Large MK...
  2. S

    Adding can lights to existing unutilized switch

    I have a question about a 4 line wire ( red, black, white, ground). My room was wired with two switches, one was supposed to work the fan, one the light. Our fan had a remote so they did not hook it up this way. This left the black wire (in the fan) empty. I’d like to add can lights to this...
  3. A

    Adding outside socket to existing cable?

    Hello, I have an outside cable going from the house to a shed can I cut and splice a outside socket into it? Socket will go on the back of the shed
  4. S

    Wiring a 2 way switch to intermediate existing wiring.

    can i wire a 2 way switch to existing intermediate wiring
    • Stewart
    • Thread
    • 2 way existing intermediate switch wire wiring
    • Replies: 15
    • Forum: Lighting Forum
  5. H

    Outdoor lighting - adding to existing

    Hi all, Based in UK (not US although this is showing for some reason). New here but have a few electrical projects planned. Firstly, I have 2no outdoor lights served by a single switch (see attached photograph). I am doing the garden (new decking) and intend to add - 4no LED post lights -...
  6. G

    New Build house off existing supply, export PME or TT

    HI all, customers are building a small house and im coming off thier PME supply to the new build, 25mm 3 core SWA, small two bed house about 40mtrs away builders have put another MEB box next to the existing one and im fitting a metal clad switch in with 100amp 100ma time delayd RCD to RCBO...
  7. D

    Adding bluetooth to an existing car stereo

    Hi Guy's, Greetings from Spain! hope everyone is doing well? Name is Dennis 33 years old and have a small small background in electrical engineering (when I was 20 years old I did 1 year at the university of applied science.) Happy to be here! So here is the explanation, I would like to add a...
  8. J

    Adding a PIR to existing light

    Hi, I have an outside light that I would like to add a PIR to while keeping the ability to continue to use the switch as normal, do I simply add the PIR in parallel to the switch as shown in my excellent high quality attached drawing? :) Or will this damage the PIR when the light is turned on...
  9. B

    Need help choosing correct size main breaker for existing subpanel

    DIY homeowner here. I need advice, but will hire a pro if major rewiring needs to be done. I purchased a home with a 200amp service. There is a detached garage about 15’ from the house. I dont think the subpanel in the garage was wired correctly. There are currently three 4awg aluminum branch...
    • bartleyhs
    • Thread
    • breaker correct existing help main main breaker need help screwfix size subpanel
    • Replies: 9
    • Forum: UK Electrical Forum
  10. N

    Adding outdoor light to existing circuit

    Hi, I simply want to add an outside light to an existing circuit in the garage. There is a single switch operating a ceiling light in the garage, would it be ok to change the single switch to a double switch to connect the outside light or is there a better way of doing that? Please let me...
  11. D

    Help with existing extractor fan

    Hello I'm. Swapping over a fan and need some help with the wiring. Basically the new fan has L1 L2 N Please can you tell me which cable goes in which. I have attached the pic of the switch the existing fan and the wiring diagram I understand the neutral but unsure which is the L1 or L2...
  12. K

    Cooker

    Hi I have just bought a new cooker and it has a cable and plug on it but my old one doesn't. Can I put a socket on the existing cable (6mm I think) and then just plug it in.
  13. Mark42

    Augmentation of existing submain. Complicated layout. Advice please!

    Apologies for the complexity of this question, but there’s no easy way to explain it. This is a remote Norfolk house and workshops, developed over 30 years. Due to diversification, building B on the plan needs more power than originally expected, and building D is a recent addition. I’d...
  14. L

    UK Testing

    On a continuity test on existing lighting circuit, do all bulbs have to be removed, what if there is to many or some can’t be reached. Trainee Electrician
  15. M

    Connecting a thermostat to an existing boiler

    Hi everyone. Im new here and I apologise if this has already been asked. I am trying to connect my thermostat to my existing combi boiler. The thermostat is under the boiler and has 4 core wire coming out of it. The gas engineer who came out to service the boiler said that it can't be...
  16. F

    What kind of Electric Shower install is possible with my existing consumer unit?

    Hi I am moving into a ground floor flat and would like to have a new electric shower installed above an existing bath tub, unfortunately due to low pressure from the hot water tank a plumber has advised a mixer shower is not an option and neither is a pump. I am rather new to all this sort of...
    • fearny26
    • Thread
    • consumer consumer unit economy 7 electric existing fusebox install possible rcd shower unit
    • Replies: 17
    • Forum: UK Electrical Forum
  17. W

    Using existing cable

    I'm building a extension in the near future and have recently done a lot of work on my house. During the work, I installed a cable for the heating in my extension (runs from a JB near my boiler to where the extension would be). I'm worried about getting this cable 'signed off' as the cable is...
  18. S

    rewiring existing ceiling fan with light on a 4way & 3way(separate?)

    existing fan w/light;2switches(3&4way);can i put fan one 1 switch and light on the other switch? So I want to be able to turn off the light and keep the fan going. I currently have to unscrew the light bulb in order to have the fan running without light. Can I have the light on one switch and...
  19. B

    Adding batteries to existing solar panel installation

    I am working with an licensed electrician but might need to find one with more experience. I understand electronics extremely well but again, am using a licensed electrician. Our house has 10 solar panels. A small inverter is mounted beneath each panel. All ten inverters are wired together...
  20. J

    Outside lighting

    I have 1 external light in my garden and would like to install 5 more, what’s steps would I need to take to do this? Could I spur off my existing light? Would I need junction boxes for each light?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock