heyup tony, stripped one of our demag jib hoists down suspect contactor welded in, and i have found what appears to be a double "coil" contactor A1 , A2, B1, B2. the motor is a 2 speed hoist, with another contactor mounted at the side 2phase in from the double coil contactor dead side and 4...
Hi there,
Sorry to ask stupid questions but i dont know the answer to them so appreciate any help cheers!
1). When a job asks for a JIB electrician do they mean an approved electrician or can a electrician with a lesser grade also apply.
2). Is a JIB card an ECS card?
Flakey
Thread
approved
card
certification
cheers
electrician
generally
jibjibcard
scheme
Finally pulled my finger out and sent off the documents today for a jib card. As I noticed my ECS test expires early next year I thought I best get it sent off. Im pretty sure I'm eligible for a gold card but just after someone to clarify and how long It roughly takes to process.
i have level...
I need some advice with regards the JIB.
I have my NVQ 2, completed the level 3 and was offered a job away from home as soon as I finished the course. As a result I never fully completed my level 3 as I didn`t do the on site portfolio (this was 15 years ago).
I have 17th edition and 2391...
JB1975
Thread
advice
because
card
certification
jibjibcard
level
needed
never
qualified
scheme
years
Hi all,
Im about to send off for my first ECS card and grading.
Ive done 2330 2/3, 17th Edition, 2391, Im currently on the NVQ 2356 and have included a letter from my assessor, I have 7 years work experience From installs to periodics I have a letter From my Employer who i have currently been...
Hi,
Hope I'm posting this query in the correct forum.
I'm looking to return to the Electrical industry after few years break and look like I need to join the JIB, however I'm a little confused with what grade I will achieve as didn't really get any real guidance when i phoned them :(
In short...
Bwgs
Thread
card
certification
electric
electrical
experience
jibjibcard
qualifications
scheme
status
Am not jib registered and I am taking an apprentice on this September the jib rates seem abit much to pay out in my opinion. Does anyone pay less than this. I realise if your jib u have to pay that rate but non registered pay whatever they like what is a realistic rate???am on my own and...
Hi people
i got into the electrical game a little late compared to some people..
i completed my C&G 2330 level 2 & 3 ... and got myself a JIB ECS card but i had no previous experience so i got a laborer graded card..
i have now got myself 17th edition and a year and a half experience in the...
Help required my jib card is out of date and I have been told by the jib / Eca
The nearest recognized test centre is Cheshire and there are none in Lancashire!!!!
Thing is I am near Preston seems a bit far when Preston college runs jtl apprentice
Courses any ideas would be greatly appreciated...
Hi guys 1st post- just looking for abit of advice.
I have 2351 City and guilds Electrical Installation, 2391 Test and inspection and 17 edition. Iv been working as a Electrician for 12 years, but alot of jobs are now asking for a JIB card. Iv looked at the requirements but am unsure on what...
Bluespark
Thread
after
again
card
certification
course
grade
jibjibcard
question
scheme
training
There's thousands of posts on this but i cant seem to find anyone in my particular situation, and I have rung the jib but as rear usual they give conflicting answers so here it goes,
im after the elusive gold approved card my quals are:
2330 lv 2
2330 lv 3
17th (haven't taken the amendment)...
Hi Guys. First ever post on a forum so bare with me...
Basically I am looking at applying for my JIB card. I have my 17th edition NVQ 2356 and 2330 level 2. Only problem is I never finished my 2330 level 3. I did the level 2 fine and the 301 and 302 of the level 3 but never completed. Can I...
Dervan
Thread
card
certification
completed
finish
jibjibcard
level
scheme
still
without
Hi i completed the 2330 levels 2 and 3 a couple of years ago to the 17th edition and sent off for my jib card which came back with trainee on it.
I have since completed the nvq 3 and want to renew my jib card,but do i need to do the 2382 17th edition exam for them to grade me as a an...
dazza1981
Thread
card
certification
completed
edition
electrician
jibjibcard
scheme
years
I have worked as a marine electrician for the last 10years, four years ago I started studying through a training provider and have obtained the city and guilds 2330 level 2 and 3, the 17th eddition wiring regs and have also obtained the level 3nvq 2356. I have been offered other work outside my...
saldamar
Thread
card
certification
jibjibcard
level
other
scheme
scotland
types
Just wondering if anyone can give me any advice. I work cards in for a JIB registered company and I'm currently being paid as an approved electrician but on the 2008 rate. The company MD has given the current economic climate as a reason why my wages have not gone up with the annual JIB rise. My...
Hi
I started for a JIB company about 3 and a half months ago. Thier office is in birmingham and i work in oxford. Now they have put me on 'stand down' which means i have to go sit in the office for 7 and a half hours doing practically nothing. Thing is I dont only have to pay the 20 odd pound...
Louk
Thread
because
card
certification
jibjibcard
office
oxford
paying
please
rules
scheme
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.