paperwork

  1. A

    Trainee section help

    Hi good evening i applied for access about 2 weeks ago and still can't gain access just wondering is there anything else I have to do any help would be great :smile: regards adam
  2. G

    Which paperwork?

    Hi again Getting certs together for my first Elecsa assesment. My project was a CU change at my brother's flat. Notified building control as advised and completed, tested, energised and filled out the certs. All good. Building control came and inspected the work and advised on some further...
  3. C

    Duplicate paperwork books required

    Hi Everyone, After some recommendations as to where to get some duplicate books done such as small works jobs sheets, call outs etc? Am NAPIT registered also & although do my certs on PC, would be handy to have aduplicate test certs book to do on site, am aware can get from NAPIT but ideally...
  4. H

    NAPIT registration - paperwork nightmare

    Hi. This is my first time on this forum (on any forum actually). I hope someone's out there. I'm applying for my registration with NAPIT and along with all the other oudles of paperwork I seem to need they expect me to have a "system identifying responsibilities for safety, quality and...
  5. G

    EDF not recieved paperwork, but FIT application.

    Customer just rang, was at work so not got all info, but the jist is he said there was a problem getting his FIT payment as EDF say they havent recieved the paperwork, i think they have received the FIT application forms because i emailed them, i think its the PV commission sheet and Electrical...
  6. 1Justin

    Formal paperwork or not, for condition report prior to CU and other works?

    Customer has had builders in (nearly finished), taken down internal walls and made extended kitchen space. Various circuits loose, and dangling off cables etc. Customer wants quote for the kitchen which is now concrete and old plaster. 20 minute first visit confirms 16th ed’n board...
  7. W

    sign off for a customer whos company has gone bust

    Guys, we have been asked by a customer that has had an install done but the company have went bust. We have looked at the job at it meets all install criteria. we are aprehensive about the legals. what implications would there be if we signed off. regards wiggly
  8. G

    EICR 3 Bed Detached In Half Hour

    Speaking to someone recently who's recently had an EICR done on a 3 bed detached 1970's, they wanted my opinion on a couple of things. I ended up asking out of interest how long it took. They said two of them turned up and half hour it was done! To which i replied no chance. I said it must of...
  9. M

    Paperwork

    Hi we are quite a well established company in our area, started up on my own around 10 years ago and do fairly well. However, my biggest downfall is the paperwork, I just cannot get systems in place that work (or that I can keep to). I find it extremely difficult to book work in and keep to...
  10. N

    What Paperwork do you issue?

    Hi Just wondering what paperwork you all issue when replacing a consumer unit, I've been issuing an EIC and a schedule of test results I normally print them of IET website but I was just looking through their amended forms and was wondering if I should also be completing a schedule of...
  11. M

    creating your own paperwork

    Morning all, I'm bored, everyone's out and I'm catching up on some bits and bobs! I've been toying with the idea of doing my own letterheads, invoices, job sheets etc, for a while. I want them to look professional, possibly use logos for NIC, Safe Trader etc, and of course text. I also want to...
  12. R

    When do you actually do the paperwork?

    Hi Just a question here regarding testing and certification. If you got called to a house to replace a socket that had its casing cracked or you put a lovely new B&Q chandelier up for someone would you then do a minor works Cert + Si + STR? Seems a little overkill to me If you don't what's...
  13. S

    MCS Paperwork / signing off other people's work

    Hi I'm an MCS (NICEIC) and REAL accrecredited PV installer. To date I have carried out a number of installations from start to finish i.e. providing materials, fitting panels, commissioning etc. This means I have also done all paperwork from the initial quotation and contract to commissioning...
  14. T

    16th Edition Paperwork

    Hi Guys and Gals. Have been passed some 16th edition minor certs for an installation in feb 2008. 2 of these are for installs in a kitchen. one for the cooker and one for sockets. Question 1. Was a Minor adequate for a special location in the 16th? Question 2. What was the requirement for...
  15. P

    Rough jobs

    Today moved 4 panels for company that had loads of work in the november madness!! well starters WRONG mid and END clamps (too small) cannot tighten to correct torque! (will defo move in couple of yrs) also brackets fixed with 1 screw ! cables and mc4 connectors laying on roof in full view ...
  16. K

    Passed with elecsa yesterday

    Passed my assessment with elecsa yesterday, assessor chris thomas put my nerves at ease stright away very helpful fella. For those who want to know it went like this, firstly spoke about what experience i had then went through all my paperwork, required a healthy and safety policy and risk...
  17. T

    type of paperwork for test

    I carried out a vvisual condition report on a medium sized commercial premises a couple of weeks ago To cut a long story short the switchgear and db`s were rubbish with shields missing, a cover missing and rusty etc, priced for replacement switchgear which was accepted, as required I tested...
  18. S

    g59 paper work x 2 good money paid we sign off

    Urgently need someone to do 2 x g59s ( the inverters are g83 compliant ) so I will sneak them through dno must be completed prior to 12 noon friday will pay cash mark 07866 777 474
  19. S

    Completing 3 phase MCS/FIT paperwork

    Can anyone who has installed a 3 phase system using 3 x separate inverters across the phases please advise what they entered in the registration forms? My installer is not absolutely sure as there are effectively three PV systems bolted together and I want to make sure it is spot on without...
  20. S

    newly mcs!!!

    Hi all ive recently achieved my mcs, ive completed 1 installation and registered it with gem serve and received the certificate. is that all i need to do? im not quite sure of the rest of the process do i need to contact the dno ?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock