Discuss 2 water supplies into one flat??? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

A

aaronstuart

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Some advice please...

There is 2 water supplies going into a little flat side by side ( one supplying that flat and the other supplying a flat 2 doors down - was a shop but being converted to flats )

I have bonded at the little flat but what about the pipe which goes up to ceiling , runs in void and down into other flat.

Now I realise I need to bond that at point of entry in the new flat, but what about where it actually enters the building and runs alongside the other water main?

Any help much appreciated
 
Aico 3000 Range
This official sponsor may provide discounts for members
  • Thread Starter Thread Starter
  • #2
Needs bonding in both flats....

each flat is an equiptential zone and any external pipes structural steel etc needs bonding
 
W

wattsup

  • Thread Starter Thread Starter
  • #3
Just bond em, costs nothing...bond anything that cannot move and made out of copper/lead/iron.
Plus it confuses the supply in charge guy, he just ticks..ok
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Reply to 2 water supplies into one flat??? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Top Bottom