Discuss 2330 course price increases in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

B

bobajob

Hello again,

I don't know if my college is the only one but I noticed that the first year (part time) of the 2330 level 2 course has gone up in price by 36% (from £589 to £802) from last year. The 2nd year only went up by about 16% ((£435 to £505)which seems a lot even so) and the level three course has jumped up by a whopping 86% (£550 to £1025):confused: All of the concession prices stayed the same (but I don't qualify :()

Is this normal? Is it my college having a laugh or are there perhaps some changes to the course from C&G that would justify such a large increase? If thats the price I will have to pay it, but it would be interesting to know if any of you know anything.

Thanks
 
Not sure if this is true but i asked this question a couple of weeks ago to my tutor and his reply was ' the higher the qualification the higher the fee' ...go figure! 2330 level 3 doesn't even have any practical sessions as such so its not as if the increased fees are covering equipment costs:confused: when you compare this price to say a degree which can cost thousands then i suppose there could be some logic to it.....my sympathy goes out to the companies paying for there apprentices to attend though, as if there anything like some of the students at my college then it looks like good money down the drain:eek: mind you its nice to see the young fellas catching up on some much needed sleep:rolleyes:
 
I guess my college must have woken up to what other colleges are charging and bumped up the charges. It just seems unfair that the grafters who work hard to earn enough to pay the full price are fleeced while the slackers on benefits dont get a single price increase...

Apologies to anyone out there who is genuinly on benefits for reasons beyond their control. I am speaking about those who could work but refuse to...

Soap box moment over :D
 
My 1st yr was £730, 2nd yr £830 and 3rd yr was £930. (roughly). Ain't bothering with NVQ3 as don't see point in paying another £800 just do do a frikkin log book. Bit too long in the tooth for that.
 
I asked what the reason was for the big price increases when I went for my interview. I was told that it is because our wonderful labour government have reduced funding in education. So if I was a lazy individual at school and failed to pass any GCSE's then I could get free tuition to Level 2 :confused: but as I worked hard and make a decent living now I have to pay the full price of £802 for year one. :mad: They have completely stopped all funding for level 3 and above. Oh well, such is life...:(
 
So if I was a lazy individual at school and failed to pass any GCSE's then I could get free tuition to Level 2 :confused:

I left school with no quals whatsoever. Does that mean I qualify for free tuition then? Not according to the colleges I've spoken to.

Anyway, sorry to hijack this thread but this question is aimed at cirrus (or indeed anyone who has completed or is currently undertaking the 2330).

What do the 3yrs cover? Whilst speaking to a tutor the other day he mentioned year 1 covers H&S and equations.

Year 2= First fix

Year 3= Second fix

Is this about right?
 
Hi Bane,

My prospectus said "If you are 19+ and don't have a full level 2 qualification you may get free tuition if you're studying on a course with the symbol L2E (level 2 entitlement) Level 2 qualification is 4 GCSE's A-C; GNVQ Intermediate; BTEC First Diploma; NVQ2; or Specialist Vocational Qualifications Level 2
 
Last edited by a moderator:
No Bane - well off the mark. Year 1 is basic ring mains, 1 and 2 way and intermediate lighting, a little testing and in theory classes you will cover the basics - a few formulas and science. Year 2 is a little harder with lighting design, a lot more theory, theory assignments and a 2 day practical exam and a lot of metal work (trunking, conduit, tray etc). Of course, as in yr 1 there are exams. Year 3 is far more intense with most of it based around fault diagnosis, inspection and testing, motors and three phase.

Health and safety comes up in all 3 of the years exam wise! I have missed bits out but that should give you an idea. To be honest, I slept through the first 2 years!
 
Hi

These prices are incredibly high, I paid £300 yr1, £360 yr2 and £399 this year...Am I missing something here or am I just lucky that I live where I live. Standard of teaching seems good and equipment is adequate with no real restrictions on use of materials.

How can prices vary so much I don't get it???????
 
That's just a joke. for that money it is better to the an intensive course for level 3. That way you can start working faster and would make back any extra you might pay over the college course
 
Hi

These prices are incredibly high, I paid £300 yr1, £360 yr2 and £399 this year...Am I missing something here or am I just lucky that I live where I live. Standard of teaching seems good and equipment is adequate with no real restrictions on use of materials.

How can prices vary so much I don't get it???????


OMG!!!!!! I have paid £2500 over the last three years. My college opened up new premises this year and they are considered 'state of the art' which was just an excuse to push the price for the year up ny £250! We even have to pay to park in the college grounds!!
 
My first year would have been £674.50 although I paid £35 because I wasn't working (I couldn't get benefits though because I wouldn't give up college to work on Mondays, so I wouldn't class myself as a benefits scrounger).

Second year cost £674.50 which I paid in 2 installments

Third year I have to find £1009.11 from somewhere.
 
My first year would have been £674.50 although I paid £35 because I wasn't working (I couldn't get benefits though because I wouldn't give up college to work on Mondays, so I wouldn't class myself as a benefits scrounger).

Second year cost £674.50 which I paid in 2 installments

Third year I have to find £1009.11 from somewhere.

sell your body sir
 

Reply to 2330 course price increases in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock