- Reaction score
- 3,010
Looking at a job today and the meter tails were 35mm with a 25mm earth into a 100A SP TN-S with a 10mm soldered main earth.
Tail run, no more that 3m all clipped and a short run in trunking.
The 6181Y is doncaster cabel brand.
Measured the cable at 13.5mm OD and this confirms its definitely 35mm.
Not an issue but can't think why 35mm was used, any ideas other than it's what was on the van?
Tail run, no more that 3m all clipped and a short run in trunking.
The 6181Y is doncaster cabel brand.
Measured the cable at 13.5mm OD and this confirms its definitely 35mm.
Not an issue but can't think why 35mm was used, any ideas other than it's what was on the van?