Wanted 6 way BG busbar & RCD

[Lister1987]

Messing about with my test rig again, changed out the 10way BG board for a 6 way shell (old Wylex plastic unit).

I know we don't mix and match brands but as I'm using this as a test rig I'm using what I have available - Obviously the Wylex unit has neutral and watching bars in different locations to a BG variant but I can live with that, the DIN rail takes the MCBs no issue, just can't bring myself to ripout the RCDs from the 10way as they're already terminated

Anyone got an old BG RCD and bit of busbar knocking about? Happy to cover cost

 

[Baddegg]

I’ll have a look on the van today mate, sure I’ve got some bus bar I can post ya.....got a box full of mcbs/rcbos/main switches etc I’ll have a dig through there for ya ?

 

[Baddegg]

Feel free to give me a PM nudge tomorrow @Lister and I’ll se what I’ve got mate, all settled down with me beer for the evening now ?

 

[Baddegg]

Morning lister these are all the spare rcds I had in my box...dont know if any of em will work for you...no BG sorry mate but if any of them will work you’re welcome to em ?

 

[telectrix]

i may have a spare BG RCD. i have a look later.

 

[Strima]

This do?

I've got pretty much a full board I ripped out a few weeks ago.

 

[telectrix]

@Lister.....check the busbar again do you mean for 6 MCBs? then you'll need 7 teeth/prongs, 1 for the RCD.

 

[Lister1987]

Turns out it's a 4 way board, not 6, FML you think I'd get that right....

This do?

View attachment 57014

I've got pretty much a full board I ripped out a few weeks ago.

That'd be smashing, drop me a pm and I'll fly over some pennies

@Lister.....check the busbar again do you mean for 6 MCBs? then you'll need 7 teeth/prongs, 1 for the RCD.

Yea o counted wrong....