63a MCB suitable for MK board.

[Pufferfish1992]

If anyone could help me that would be great. Wired a sub-main for an extension from an existing MK split load board in 16mm t+e. MK don't seem to make a 63a MCB for it 50 is the highest. Does anyone know which brand MCB (if there is one) suitable or will just fit in the CU? Wholesaler's weren't particularly helpful , I know the BG fit's but maximum they come in is a 50a.

 

[telectrix]

try contactum. they are physically the same as BG.

63 Amp Contactum MCB - C Type | Contactum (CPB1063C)

 

[Pufferfish1992]

try contactum. they are physically the same as BG.

63 Amp Contactum MCB - C Type | Contactum (CPB1063C)

Ok. Cheers, will try that one.

 

[westward10]

Unless it is MK you should not fit another manufacturers device unless it is approved by MK.

 

[DPG]

Do you need 63A for an extension?

 

[Vortigern]

Put an MK one in.

 

[telectrix]

as above. fit a 50A MK. other brands don't lean the same.