accenta mini alarm setup

[ferarrifeet]

hi guys, looking for a bit of help on the above alarm, how do you setup the alarm so that you can turn off pir zones at night time. thanks in advance

 

[telectrix]

programme the zones as part set.

 

[Spoon]

Or you can 'omit' zones after putting in your number.

 

[ferarrifeet]

hi, just to let you know i'm a spark so don't think the same way as alarm engineers, here's what i've tried so far, in engineers mode - programs - selected - program 2 then inhibit zones 2 and 4 theyv'e got pir's, exited then tried user code then p , suppose to stop so you can choose which program you want, but it doesn't, it shows as program 1 set on keypad, am i doing something wrong. by the way it does work when you omit the zones manually, but with females in the house it's a bit complicated.

 

[ferarrifeet]

update: i had to set the exit mode to timed, it's now letting me set program 2 ok ,but the pir zones i've selected as inhibited are not disarming after removing link, i'm doing a bench test on this at moment, the zones disarm when removing the link with the omit button.

 

[ferarrifeet]

think i've solved the problem, when in program 2 i've turned zone 2 + 4 to unused, this seems to have worked. thanks for all your help

 

[bagpuss_24]

Ok, I am (typically) late to the party with this....
If you still are struggling, I think I have an Accenta engineers booklet - will mean a trip into the loft.

 

[Mike Johnson]

It's not difficult, set the alarm during the exit beeps push "Omit" and then the Zone number that's it done.