Discuss Advice on replacing fluro batten with LED in garage in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Yesterday I replaced one of my 2 Fluro battens in my garage with a 60W LED. This was the more complicated one (lots of wires) or so I thought but I had it working fine after a little patience.

Today I have gone to replace the second fluro and what I thought would be a simple job - only 3 wires. Take 3 wires out, connect live and neutral to the batten and fit the light to the roof...

When I switch on the garage lights both LED's do not come on instantly, when they do come on they flicker and look like they are not getting enough power as they are dim.

I have double checked there are no loose wires. Help please!

Read more: Garage Batten - flickering LED's now I have replaced Fluro. - https://www.diynot.com/diy/threads/garage-batten-flickering-leds-now-i-have-replaced-fluro.521280/#ixzz5kgej4msQ
 
  • Thread Starter Thread Starter
  • #3
You must be logged in to see the message.
 
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #9
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #12
You must be logged in to see the message.
 
D

Deleted member 26818

You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #18
You must be logged in to see the message.
 

SparkyChick

Mod
Mentor
Arms
Esteemed
You must be logged in to see the message.
 
You must be logged in to see the message.
 
Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members

Reply to Advice on replacing fluro batten with LED in garage in the Electrical Forum area at ElectriciansForums.net

SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
Top Bottom