Advise needed - Wiring Up Room Thermostat

[Andy Guest]

Hi need some advise on Wiring up a new Room Thermostat...


I am replacing an old Honeywell T6360B -
T6360 Room Thermostat - Honeywell UK Heating Controls

With a new Danfoss FMT230D
FlatStat - FMT230D

Anybody know how to do this? Many thanks! Andy

 

[Octopus]

Well.... without wishing to ask an awkward question, have you read the instructions in the box for the new unit or consulted the manufacturers website?

 

[paul_h]

Is it a combi boiler you are wiring this new one into?
If so and I may be wrong but I'd need to have another wire at stat position. Live/neutral. Then from the "link" in the boiler, a flex/cable going to common (brown for example) then Blue to no contacts. It may be possible to link live to common depending if the boiler is 230v switched..... But I'd check with manufacturer as new controller may not take 230v switching...

 

[Marvo]

I'm assuming you're not an electrician Andy so I've moved this to the DIY section for you.

 

[Andy Guest]

Well.... without wishing to ask an awkward question, have you read the instructions in the box for the new unit or consulted the manufacturers website?

Hehe thanks for reply , yes checked there website and instructions but wanted to be sure that I got this correct before wiring up, I post a pic of what boiler we have if that will help, and I contact manufacturer see if they can help. Thanks

 

[Andy Guest]

Thanks, I upload boiler info in a bit, Andy

 

[Andy Guest]

Our Boiler is -
Suprima 60 HE G.C. No. 41 075 38




http://www.potterton.co.uk/docs/101209_Potterton_Suprima_HE_Range_installer_guide.pdf