All three neutral wires needed for a smart single gang light switch?

[bbgun]

Hi all,

I'm wiring one of those smart switches which is a single gang and I have three live wires (x2 com) (x1 L1) and three neutral wires that are currently in a block. The original switch just use live (com and L1).

I've wired up the new switch with the live wires but I am trying to attach the neutral wires. Do all three need to connect to the switch or could I get away with one being attached and the other two in the block?

Thanks in advance!

 

[Barnaby Stedman]

if you cant fit all neutrals into the terminal then join them together in a choc block and do a jumper from the choc block to the terminal. the main thing is that all neutrals are connected together

 

[MJPD29]

No you cannot separate them. If stuck connect them together in a 4 port wago and take a neutral from it and into the switch

 

[bbgun]

Fantastic, thanks for the advice. Used a jumper cable and it works like a charm!

 

[FatAlan]

Big assumption that neutrals are neutrals and not switched lines that haven’t been sleeved

 

[DPG]

Big assumption that neutrals are neutrals and not switched lines that haven’t been sleeved

They were already connected together, and the system was working.

 

[FatAlan]

They were already connected together, and the system was working.

Ok