Am I missing something

[yellowvanman]

Been asked to quote for some remedials and a couple of observations I am querying:

Connection is made in fuse board for 2 way switching. C3

Water and oil bonded on one cable - C3

The 2nd one is wrong if the cable is continous, which it is. Not aware of anything in the regs regarding 1st observation, unless someone can point me in the right direction.

I know they are C3s buts an insurance company is involved and in my experience they want to see all C3s fixed as well!

 

[not clever]

Neither should be coded

 

[Octopus]

Been asked to quote for some remedials and a couple of observations I am querying:

Connection is made in fuse board for 2 way switching. C3

Water and oil bonded on one cable - C3

The 2nd one is wrong if the cable is continous, which it is. Not aware of anything in the regs regarding 1st observation, unless someone can point me in the right direction.

I know they are C3s buts an insurance company is involved and in my experience they want to see all C3s fixed as well!

There is no reg to say it has to be continuous.

no code

connection for 2 way switching - no code.

 

[bigspark17]

1- no code
2- no code
quotation as follows - £0

 

[yellowvanman]

1- no code
2- no code
quotation as follows - £0

There were others, that I agreed with.

 

[7029 dave]

There is no reg to say it has to be continuous.

no code

connection for 2 way switching - no code. I am not understanding the Q.

 

[Dave OCD]

I've often used the CU enclosure as a lighting junction box when it's easier to run a switch wire and cable to light back to that position.

 

[7029 dave]

I've often used the CU enclosure as a lighting junction box when it's easier to run a switch wire and cable to light back to that position.

understand Q now. lol

 

[Guitarist]

No code on either. As Murdoch says, not even a reg that says bond must be continuous, but it is a recommendation in GN8 and is something I always do.