AM2 practice

[Carper lacy]

Hi All


I'm looking for some advice regarding the AM2. I'm hoping to carry out the NVQ 2356 in electrical maintenance as I have been working in the industry for around 10 years and currently hold L2 & L3 2365 although I have limited experience in install as I work in maintenance at the airport. I'd like to get the AM2 done before laying out the funds for the NVQ just to make sure i'm capable
I thinking of putting a practice board together at home in the garage just to try and get up to speed. Would there be anyone out there that could recommend a list of parts i may need to do this and also any other advice / training that may help.
Any help / recommendations would be most appreciated.

 

[telectrix]

see this thread.

Guide to make test board... similar to colleges powered by ring circuit

Afternoon chaps, is there a guide anywhere on this forum to make a test board similar to what you would use in college? I need to re-train myself, get some practice in testing circuits. Any appreciated. Thanks.

www.electriciansforums.net

 

[Carper lacy]

Thanks for the thread.

 

[Lister1987]

@Carper lacy , I'm also making a test board, mainly to practice college practical but you might find it useful to look at the thread;

Test Rig ; Best use of space?

I've got a 4ft X 2ft (1220 X 610mm) board for my test rig, I've got the following to add to it: Service Head (TNCS) 100A DP Isolator Single pole Henley (picked up the wrong one) BG 10way board Copious sockets, back boxes and ceiling roses Cooker switch point Fan isolator Shower Isolator I'm...

www.electriciansforums.net

I'll be updating it and the build progresses and I get time to actually work on it ?

 

[Ed Evans]

Hi All


I'm looking for some advice regarding the AM2. I'm hoping to carry out the NVQ 2356 in electrical maintenance as I have been working in the industry for around 10 years and currently hold L2 & L3 2365 although I have limited experience in install as I work in maintenance at the airport. I'd like to get the AM2 done before laying out the funds for the NVQ just to make sure i'm capable
I thinking of putting a practice board together at home in the garage just to try and get up to speed. Would there be anyone out there that could recommend a list of parts i may need to do this and also any other advice / training that may help.
Any help / recommendations would be most appreciated.

I have everything you will need to sit your AM2. what are your weakest areas? I do a training session 1 to 1 which everybody has passed afterwards. I can also show you what the rigs comprise of.