am2

[jamie2]

wondering if anyone could please help a little.ive been on refresher course and dont think there should be any problems with installation, testing, or fault finding.My major concern is the multi choice exam of which i have the related topics.Would just like to know others experiences as am alittle worried and would imagine others before they sat it were as well.many thanks.

 

[Thomas123]

It consists of the following sections

• Health & Safety
• Hand tool & test equipment use & care
• BS7671 Part 1
• BS7671 Part 2
• BS7671 Part 3
• BS7671 Part 4
• BS7671 Part 5
• BS7671 Part 6
• BS7671 Part 7
• BS7671 Part A
• Motor control and overload protection
• Installation techniques
• Building Regulations
• Environmental Systems

I wouldnt worry about it, you get to take all the books in. revise your motors though as they are not in there.
You will also have some general knowledge questions, for example i had a question "If a cold steel chisel head started to mushroom you would do the following...."

 

[i=p/u]

i know very little about motors where did you scrub up on these...

 

[Dr Drew]

i know very little about motors where did you scrub up on these...

Search Swindon massive 2330, has some questions about motors that may help. I've got my AM2 on 5th December, I've been told to revise motors and regs such as RIDDOR as these arnt in the books your given.

 

[i=p/u]

cheers , ive seen that float about , but never actualy looked