Avo/ megger CM500 faulty switch

[Eggster71]

I know there's at least on fella from Avo here, I've got a CM500 and it seems to have a fault with the selector switch. For an RCD sensitive loop sometimes I need to set it on 15mA setting but other times it'll only do the test on the ramp RCD setting. On the 15mA setting it'll quite often start trying to test IR.
Is this something I can get repaired at all, it's really beginning to bug me!!!!

 

[megger mark]

I know there's at least on fella from Avo here, I've got a CM500 and it seems to have a fault with the selector switch. For an RCD sensitive loop sometimes I need to set it on 15mA setting but other times it'll only do the test on the ramp RCD setting. On the 15mA setting it'll quite often start trying to test IR.
Is this something I can get repaired at all, it's really beginning to bug me!!!!

It is most likely repairable, however Megger have a fixed price system and will cost a fair bit.
If you would like to PM me i might be able to point you in the right direction.