Back box

[JohnsonsAces]

What's the best method to use when pushing out the back of this back box? Would I need to use a gromit?

 

[Baddegg]

The bits will push and snap out easily and should break away cleanly push out with a screw driver no need grommet just make sure no sharp points left....

 

[7029 dave]

If you are knocking out back entry as mentioned, if top bottom or sides, snup pliers/screwdriver.

Which has made me think way back when I was an apprentice , boss I worked for ,if you broke a pattress he would go nutts, dropped an 8ft pop pack he just laughed.?

 

[Baddegg]

If you are knocking out back entry as mentioned, if top bottom or sides, snup pliers/screwdriver.

Which has made me think way back when I was an apprentice , boss I worked for ,if you broke a pattress he would go nutts, dropped an 8ft pop pack he just laughed.?

It bugs the s£&t out of me if a pattress breaks ?

 

[telectrix]

i always use the shaatterproof ones when i can.

 

[7029 dave]

It bugs the s£&t out of me if a pattress breaks ?

It happens, especially when your a green horn.

 

[Baddegg]

It happens more if I do it with me estwing framing hammer ?

 

[pirate]

Estwing?
Posh or what?
LOL!

 

[Baddegg]

Estwing?
Posh or what?
LOL!

I was gonna write when I hit it with my big hammer....but it felt a bit crude and didn’t really convey my point ?

 

[pirate]

Money can't hide, Baddegg!

 

[SJD]

So for notches in the sides, does nobody (apart from myself) make a couple of saw cuts then just snap out the tab between them with long nose pliars?

 

[Zerax]

So for notches in the sides, does nobody (apart from myself) make a couple of saw cuts then just snap out the tab between them with long nose pliars?

I have done... depends on mood... but I keep a small file in the bag for making it neat and smooth !

 

[Andy78]

I have done... depends on mood... but I keep a small file in the bag for making it neat and smooth !

That's posh. A Stanley blade usually files mine down for me.

 

[Dave OCD]

So for notches in the sides, does nobody (apart from myself) make a couple of saw cuts then just snap out the tab between them with long nose pliars?

I do, and make it especially precise on the top edge where it's supposed to be IP4X.

 

[Baddegg]

Money can't hide, Baddegg!

I keep that hid on site I tell ya!....

 

[Timbo]

Estwing?
Posh or what?
LOL!

Had my Estwing for 38 years now! ?

 

[Pete999]

What's the best method to use when pushing out the back of this back box? Would I need to use a gromit?

Had my Estwing for 38 years now! ?

Did you have the Electricians one, or the normal wood butcher's type?