Bell 801 entryphone wiring

[Benjamin1969]

Hi. Trying to install new entryphone but can't figure out wiring on old unit. Can someone please advise which wire (blue, green, red, white, yellow) should go in which terminal (I R O T Z) from the attached picture? Cheers. Benjamin

 

[marc_v33]

I -6
R-2
O-3
T-1
Z-7

I'm sure this is the right order, hope it helps!

 

[buzzlightyear]

Hi. Trying to install new entryphone but can't figure out wiring on old unit. Can someone please advise which wire (blue, green, red, white, yellow) should go in which terminal (I R O T Z) from the attached picture

hi ben what are you trying to do ,is it changing the phone or wiring it up ?

 

[Benjamin1969]

Hi. Trying to replace an old entryphone (photo) and wiring in new phone.

Old phone is wired...

Green terminal 2
Blue in terminal 10
White in terminal 9
Red in terminal 1
Yellow in unnumbered junction
Black is loose/spare

So I'm now trying to match the five colours to the 5 Bell terminals. Advice please?

I is
R is
O is
T is
Z is

Many thanks

Benjamin

 

[buzzlightyear]

ben the phone you in at the moment is the old comelit 2602 ?

 

[Benjamin1969]

Hi. Says Urmet 1130/12 on the back.

 

[buzzlightyear]

Hi. Says Urmet 1130/12 on the back.

so why are you putting in a bell phone in .

 

[Benjamin1969]

Because Amazon said this was a straightforward swap for an old entryphone. But came with no instructions. Not as easy as I'd hoped.

 

[buzzlightyear]

Because Amazon said this was a straightforward swap for an old entryphone. But came with no instructions. Not as easy as I'd hoped.

I would not listen to them .I just fitted a bell system to day . all I fit .

 

[Benjamin1969]

Any more advice please? I'm trying lots of combinations, but cannot get them in the right order. Can anyone possibly advise? This is DIY and my partner is currently very underwhelmed by my lack of capability and suggests I should call out a "proper electrician" to sort it out for me. Please help! [I've tried to find a diagram online, but it seems that the wiring on the old unit was non-standard, and I now can't translate the wires to the new unit.]

 

[Zerax]

...This is DIY and my partner is currently very underwhelmed by my lack of capability and suggests I should call out a "proper electrician" to sort it out for me...

Is there a small child nearby that's between about 8-10... maybe they could help ?

 

[Benjamin1969]

Is there a small child nearby that's between about 8-10... maybe they could help ?

Thanks for the suggestion Zerax. Unfortunately the children are already at school today.

 

[buzzlightyear]

Ring bell and ask them and their tec dept might help.