Best fix for a friction damaged cable

[GBDamo]

As title, installing some spots for a friend and whilst in the loft noticed another circuit cable looked iffy.

on closer inspection the cable had been worn to the copper, pretty much sure it was done on installation 20 years ago.

Nobody noticed as the wear as it was face to face with the cable underneath.

I've taped it up for now but would like a more permanent fix, can probably get a couple of inches of slack and the cable runs along a joist.

I would like advice on an inline connector that will secure the cable correctly and can be fixed to the joist, or are there other better and acceptable methods in use?

Any ideas?

Ta in advance.

 

[Charlie_]

Junction Box.. MF type, won’t lose any length of cable

 

[Dustydazzler]

Wago box for me every single time

 

[GBDamo]

Come on lads, links, pretty pictures.

I'm not asking for the moon on a stick here.

Seriously though, I had Wago boxes but the cables all enter from one end and I don't have the slack to do that.

Unless that is there is one that is inline.

 

[Gary latto]

Look at quick wire connections only problem is you need to buy the tool for stripping but once got the tool quick and easy and saves loads of time terminating

 

[Andy78]

Wagobox light is inline and can be easily screwed to a joist.

 

[Dustydazzler]

Wagos and insulation tape

 

[Spoon]

Look at quick wire connections only problem is you need to buy the tool for stripping but once got the tool quick and easy and saves loads of time terminating

They are good, but only do up to 16A, up to now.

As title, installing some spots for a friend and whilst in the loft noticed another circuit cable looked iffy.

Is it a light circuit?

 

[Charlie_]

Ashley J804 junction box

 

[Dustydazzler]

Ashley J804 junction box

View attachment 48847

That’s a right bobby dazzler

 

[Charlie_]

That’s a right bobby dazzler

Spank you very much!

 

[Charlie_]

That’s 20a, they also do heavier ones

 

[GBDamo]

Ashley J804 junction box

View attachment 48847

That looks like the right part for the job, cheers.

 

[NDG Elecs]

That’s 20 grams, they also do heavier ones

Yep the 32 gram ones..

 

[NDG Elecs]

Come on lads, links, pretty pictures.

I'm not asking for the moon on a stick here.

Seriously though, I had Wago boxes but the cables all enter from one end and I don't have the slack to do that.

Unless that is there is one that is inline.

Just in case you change your mind Damo !