D
Danbo
What is the best way to test a board when doing a PIR which is only on when the economy 7 tariff kicks in? (other than doing the test at night)
Cheers
Cheers
Discuss Best way to test a board which is run on ecomomy 7 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
- Reaction score
- 67,272
either temoprarily supply the board, but that would probably entail cutting seals, do it at night, or dead test it and calculate Zs from R1+R2. ( assuming Ze is the same for both day and night supplies. IR tests are no problem ,as they are also done dead.
Reply to Best way to test a board which is run on ecomomy 7 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
if a house has economy 7, off peak board and on peak board. and where the meter only energizes the off peak board during the night for the storage...
I've a 3 phase storage heater currently wired to the main fuse box in an office I have. The heater has 2 supplies/isolators, 1 for charging at...
I am asking on behalf of a friend who has an outbuilding that he uses as an art studio, the building is fully insulated and is currently heated by...
I have a fuseboard change I need to do soon
I’m putting in a FUSEBOX 7 or 10 way RCBO+ SPD
My only concern is how I should run the pyro cables in...
Been round to a house to quote to replace some storage heaters for new panel heaters and came across a strange (to me at least) way of wiring the...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.