W
WarrenG
Might be a borrowed neutral?
Last edited by a moderator:
Discuss Borrowed Neutral ?? in the Australia area at ElectriciansForums.net
Share this page
Reply to Borrowed Neutral ?? in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
I have a client with what appears to be an intermitent fault on the lighting, but trips the power.
The installation has a 16th edition board with...
During some testing I found a N-E IR fault on the kitchen lights of 0.1Mohms. I also found a N-E IR fault on the ring sockets, again 0.1Mohms...
Hi everyone,
I want to repurpose an old cable that was previously used to power a 3-phase machine. The cable is 4L1.5 micc, and I don't want to...
I just bought a Westinghouse generator (When 12000) and my neighbor is telling me no to use it until I know for sure if it is "Floating Neutral"...
Evening all.
I did an EICR recently and then changed a consumer unit.
As part of the EICR process I take off around 25% of all accessories to...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.