Discuss BS number MK 3 phase main switch in the UK Electrical Forum area at ElectriciansForums.net
Share this page
OP
- Reaction score
- 633
My guess too Andy, but wanted to check.
- Reaction score
- 12,559
Seems right to me being coupled with a board using BS3871 breakers.
- Reaction score
- 25,417
BS5419 was superseded by EN60947-3 in September 1992. BS3871 was withdrawn two years later.
- Reaction score
- 12,559
I'd rate that as informative if I could
Reply to BS number MK 3 phase main switch in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hello,
Looking for some advice following a botched 3 phase upgrade today. Some background:
Commercial unit originally fitted out (4 years ago)...
When there exists a single-phase transfer switch within a 3-phase distribution system, is it necessary for both feeds to the transfer switch to be...
Hi everyone,
I have been asked to pull in some new 3 phase supplies for 7 new welders which do not require a neutral connection.
The client has...
Hi lads 5 year safety inspection the spark put the tails back and later line 2 of the 3 phase blew blowing the box off the wall and taking out the...
Good day to you. I need electrical drawings urgently and hopefully there is someone that can assist me. They are all for electrical trade test...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.