B
brizospark
Does anyone know off the top of their head, or have a 20mm bush to hand to tell me what the measurements across the flats of the hex are, is it 24mm?
Discuss Bush flats size in the Australia area at ElectriciansForums.net
Share this page
OP
Wstanton
the largest external diameter is 23.7mm.
the largest distance flat to flat is 20.6mm
measured some earlier!
the largest distance flat to flat is 20.6mm
measured some earlier!
Last edited by a moderator:
OP
Deleted member 26818
They can vary by make.
OP
SirKit Breaker
A good pair of waterpump pliers will tighten it up whatever size it is.
Cheers..........Howard
Cheers..........Howard
Reply to Bush flats size in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
Hi all,
I am currently in the process of quoting a job to renew the mains for 19 flats. This is the first job of this type that I have quoted so...
I’ve got a job to quote for turning 1 big flat into 2 smaller flats. The DNO are looking at installing new meters in the communal area. I need to...
Good afternoon all,
I have been asked to look at a problem with a bolted neutral but no one seems to know what exactly is the problem.
SSE...
Hello everyone,
I am currently in the process of estimating the electrical demand for a new construction development that will consist of an...
I was working on a small door entry system today (4 flats ). It got me thinking , that say it was 16+ flats system , how would you go about...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.