Aico 3000 Range
This official sponsor may provide discounts for members

Discuss changing consumer unit in the Electrical Forum area at ElectriciansForums.net

P

Peter Woodford

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Have just looked at changing a consumer unit in a flat plus installing some new sockets. Do i need to install a DUAL RCD board 2x 80A 30mA RCD 7 way the flat only has 4 circuits. 1. lighting 2.ring for small kitchen and front room all open plan 3. Boiler 4. cooker

let me know what you think

pete



 
CK Tools :) The professionals choice when it comes to Electrical Tools
This official sponsor may provide discounts for members
S

Spudnik

  • Thread Starter Thread Starter
  • #2
Up to you peter.

You can use a cu with a main switch and then use RCBO's on each circuit.

However, this can work out more expensive.
 
P

Peter Woodford

  • Thread Starter Thread Starter
  • #3
Up to you peter.

You can use a cu with a main switch and then use RCBO's on each circuit.

However, this can work out more expensive.

thanks think i will go for the 7 way dual will be cheaper
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Reply to changing consumer unit in the Electrical Forum area at ElectriciansForums.net

Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Top Bottom