Hi just wondering if anyone could help me out i am stumped.I need to know if anyone can figure away around my cam and crank sensor's wiring.I basically have a bigger engine conversion in my car and have high voltage to cam sensor plugged in car will cut out unplugged i am getting high voltage.i have learned a little on wiring diagrams using vauxhall tis2000 but struggling now.i have had my ecu modified for my start of injection timing etc,but cant think of away around the wiring the first pic is the sensor's wiring for my engine and the second pic is the sensors for the engine loom and ecu i am running sadly i cant use the sensors that match the loom and ecu without using some sort of trigger wheel.I know its not a normal post you would get just need a bit advice.thanks