CarbonPepper
DIY
- Reaction score
- 0
Any tips / tools for finding cable runs? Sockets and outside light stopped working in an extension.
Experienced DIYer / renovator, doing some uncovering for my spark. What with social distancing and the fact that old horrible artex (ugh - will be replaced) might have asbestos - A lot of the uncovering is being done by people other than the sparky. Mostly me
1960s house with a flat roof extension for a ground floor bedroom with en-suite. The bedroom has two sockets at opposite ends, on a radial. One is working. On the other, the radial extends through the wall for a socket in the en-suite. Both these sockets are dead. Additionally there's an outside light which is also dead. Other lighting circuits are OK. MCB has no problems.
The house was built during a copper shortage. Some of the plumbing is steel pipe and spark has found aluminium twin and earth before now. We're hoping this is a potential cause of the fault, that it's come loose in a JB somewhere.
I'm really hoping there are no boxes above the ceiling in the flat roof area. Trying to find where the cabling comes into the rest of the house is not clear and lifting floorboards hasn't revealed much so far. To go further means dismantling built-in wardrobes.
It will be done if it needs to be done,
But I wondered if the experts have any tips?
Experienced DIYer / renovator, doing some uncovering for my spark. What with social distancing and the fact that old horrible artex (ugh - will be replaced) might have asbestos - A lot of the uncovering is being done by people other than the sparky. Mostly me
1960s house with a flat roof extension for a ground floor bedroom with en-suite. The bedroom has two sockets at opposite ends, on a radial. One is working. On the other, the radial extends through the wall for a socket in the en-suite. Both these sockets are dead. Additionally there's an outside light which is also dead. Other lighting circuits are OK. MCB has no problems.
The house was built during a copper shortage. Some of the plumbing is steel pipe and spark has found aluminium twin and earth before now. We're hoping this is a potential cause of the fault, that it's come loose in a JB somewhere.
I'm really hoping there are no boxes above the ceiling in the flat roof area. Trying to find where the cabling comes into the rest of the house is not clear and lifting floorboards hasn't revealed much so far. To go further means dismantling built-in wardrobes.
It will be done if it needs to be done,
But I wondered if the experts have any tips?
