S
SKY
Started a job today running in cables, after the customer cleared out the coats and shoes from the meter cupboard I find this DIY bad boy.
A clamp on the outer containment of the incoming main - I did a quick loop test on the socket with reading of 0.40ohms.
Will do a full ZS and ZE when I go there in a few day.
I guess this must have been a TT system in the past but there is no sign of the rod.
Do I need to inform DNO to sort this out?
A clamp on the outer containment of the incoming main - I did a quick loop test on the socket with reading of 0.40ohms.
Will do a full ZS and ZE when I go there in a few day.
I guess this must have been a TT system in the past but there is no sign of the rod.
Do I need to inform DNO to sort this out?