Dodgy trade pictures for your amusement! - 1 Million Views!

[Mike Johnson]

That's the cleanest and most tidy house I have seen in any of these U-Tube video's, that's about the best I can say for it.

Have you watched Artisan Electrics video of his apprentice new tools, the apprentice has not got a clue about anything concerning electrics, I would expect someone going into the trade as an apprentice to have some knowledge.

 

[westward10]

How shall I wire this intercom spur, I know ring final.

 

[DPG]

How shall I wire this intercom spur, I know ring final.View attachment 64806

Parallel conductors to cope with the high load ?

 

[MrPupsi]

Haha, to be fair I’ve done something similar for a socket in a plant room.
Wholesaler was closed for the day and didn’t want to make a second visit to site for a 16a mcb!

 

[Dustydazzler]

As above almost certainly a case of the 32a was empty so they made a mini ring for the spur for the intercom

 

[westward10]

As above almost certainly a case of the 32a was empty so they made a mini ring for the spur for the intercom

No all was installed at the same time for landlords communal areas. There are three in the same block all the others on 10A radials.

 

[StephenRowley]

Deal on board with a selection of breakers.

 

[nicebutdim]

Found the wholesale had supplied one breaker incorrectly and didn't fancy trying to exchange it late in the day?

 

[Raptor0014]

Had my assessment today. The guy was so impressed with my socket installation he took a picture for me.

 

[SparkySy]

Today's lovelynessess

Novel no wonder the lid wouldn't fit properly

Bathroom pullcord ah no wait no pullcord just bathroom bodgery!


Kitchen light packed up so we have tied this t&e to the gas pipe and plugged it into a socket. Mmm better have a look at the socket too!

Oh b@l@x!!
I love landlords EICRs!

And for my final offensive offering. Elsewhere in the UK, My gate is not working can you have a look at it?

Yeaas ok then can you get rid of the spaghetti so I can see the wires. Oh wait the wires are the spaghetti

#lovemyjob!

 

[Dustydazzler]

I wish people would stop posting my work ...

 

[marconi]

Had my assessment today. The guy was so impressed with my socket installation he took a picture for me.

View attachment 65024

Is the cheerful chap actually holding the tiled wall up too?

 

[SparkySy]

He's holding the sticky trunking back till it glues on properly!

 

[freddo]

Today's lovelynessess

That's super creative, fitting the MCB inside the enclosure like that, I could try that if I ever need to add a circuit to an already full CU.

 

[SparkySy]

Yes as long as you don't use 0.75 twin core flex bolted and washered to the bus bar for the feed in it will be sound??

 

[Raptor0014]

Is the cheerful chap actually holding the tiled wall up too?

You are an sharp eyed eagle.

I was indeed as the tiler had just finished. But had another job to go to so couldn’t wait for grout to dry then wire the socket in. Client needs to use the shower this evening.

 

[telectrix]

epic fail. the top of the pattress is not IPX4. needs some blu-tac.

 

[Raptor0014]

epic fail. the top of the pattress is not IPX4. needs some blu-tac.

Photo doesn’t show it well. I used sellotape.

 

[pc1966]

That's super creative, fitting the MCB inside the enclosure like that, I could try that if I ever need to add a circuit to an already full CU.

Well it gets round the problem of incompatible busbars for sure...

 

[T Wilson Elec]