Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Discuss elecsa part p inspection comin up next week help !!! in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net

G

GS Electrical

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

:) hi guys any help is appreciated like what kind of questions am i expected to get just done a mains change at home to show him as im a new company and a bit of what comes first the chicken or the egg situation?
 
Scolmore Electrical Products
This official sponsor may provide discounts for members
S

Spudnik

  • Thread Starter Thread Starter
  • #2
To be honest he could ask you anything if its in the regs!

Favorite is RCD max trip times on various tests, values of Ze etc.

Others are bathroom zones, switch heights.

He will also ask you to perform a few tests and compare them with the test results sheet and then ask you to interpret the results.

Remember, its one thing to be able to perform the tests but you must be able to say WHY you do the test and to interpret the results.

One last bit of advice is before you do any dead tests is to ensure safe isolation.

PROVE DEAD!!!!!! with a good voltage indicator.

If you fail to do the above then it could be an instant fail.

Good luck!
 

Reply to elecsa part p inspection comin up next week help !!! in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net

CK Tools :) The professionals choice when it comes to Electrical Tools
This official sponsor may provide discounts for members
Top Bottom