Fault loop impedance testers

Discuss Fault loop impedance testers in the Australia area at ElectriciansForums.net

most of us use MFTs, like Megger 1721 or Fluke 1654,but you can get individual testers. e.g. 1 for EFLI, 1 for IR, etc.
 

Reply to Fault loop impedance testers in the Australia area at ElectriciansForums.net

Similar Threads

M
G99-SGI-3 4.4 kw set export limit phase to neutral loop impedance test on site
G99 SGI-3 4.4 kw set export limit phase to neutral loop impedance test on site 0.309 ohms and dno max being 180 m ohms or 0.018 ohms so site...
Replies
11
Views
1K
westward10
westward10
S
UK Amtech/Trimble - Excessive Earth Loop Impedance on SWA cables
Hi All, I'm new to Amtech/Trimble and I've been asked to review a model. I'm looking at circuits that are SWA cables using the armour and an...
Replies
4
Views
513
Steve W
S
Mixtel
Confused - Telaris 0100 plus
I've just picked one of these up on a famous auction site. The voltages, low and high resistance ranges all appear to be working fine but it's not...
Replies
7
Views
254
Mixtel
Mixtel
H
Loop impedance calculation
Hi all , The measured value of loop impedance for a circuit is 2.4Ω. If the temperature at the time of the test was 20°C and the cable is 70°C...
Replies
4
Views
702
helio007
H
sakurakey13
Level 3 Design Project - How to calculate Zs?
So I’m doing my level 3 design project at the moment, and I’m on the question where you do all the calculations on each circuit, I’ve taken the...
Replies
3
Views
1K
David1977m
David1977m

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock