Discuss Feed from socket in the UK Electrical Forum area at ElectriciansForums.net
Share this page
- Reaction score
- 5,806
It is possible to power a lighting circuit from a socket circuit via a fused connection unit, and this is often done in small sheds that have a couple of sockets and a light.
It most certainly must not be done without the FCU.
It most certainly must not be done without the FCU.
Reply to Feed from socket in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi,
I'd like to move the existing socket that feeds the boiler down to where I've pencilled in that can be seen on the photo. The socket to the...
Hi guys,
I have supplied my Shed with a 6mm SWA cable into a nice consumer unit. In there I have a 6Amp MCB for the lights and a 16 A supplying a...
Hi guys, newbie posting!
Does the following sound ok...
Existing circuit:
SOCKET on a ring -> spur to SWITCHED 3A FCU -> SWITCH -> hardwired FAN...
hi ive got an unused isolator in my airing cupboard that use to run a shower. no longer have has have combi boiler feeding a new shower. the...
I wondered if it is OK to have 2 x Main Switches in the same consumer unit. One feeding the RCBOs in the House and one feeding the CU in a garage...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
C.K VDE Interchangeable Slim Bladed Screwdriver Set- Latest: AngelLaHash
-
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.