Hi guys,
I recently bought a new place, and it has some old fashioned dado rail around the living room and the first thought that came into my head was RGB LED strips in the dado rail going around the entire room.
I've measured the total LED strip length being approx 1306cm.
Also the approx total cable length from a PSU in the attic is 1919cm (assuming we're using a parallel circuit to inject power into the LEDs along various points in the run).
I'd like to use RGBW, but RGB is fine. I'd like to be able to do mixes of colours around the wall too.
What I need to understand is:
What PSU do I need to power the LEDs?
What cable do I need to carry that power?
Will I be able to use a controller?
Will I be able to set lighting zones?
Any help is greatly appreciated, if you need to ask anything to further understand what I'm after please ask.
I recently bought a new place, and it has some old fashioned dado rail around the living room and the first thought that came into my head was RGB LED strips in the dado rail going around the entire room.
I've measured the total LED strip length being approx 1306cm.
Also the approx total cable length from a PSU in the attic is 1919cm (assuming we're using a parallel circuit to inject power into the LEDs along various points in the run).
I'd like to use RGBW, but RGB is fine. I'd like to be able to do mixes of colours around the wall too.
What I need to understand is:
What PSU do I need to power the LEDs?
What cable do I need to carry that power?
Will I be able to use a controller?
Will I be able to set lighting zones?
Any help is greatly appreciated, if you need to ask anything to further understand what I'm after please ask.