Finishing up my first job.....

[saint]

Just installed my first Pv installation and am handing over to the customer. Am i missing anything from list below?

Handover manual
Notify on Gemserve site.
Notify part p

 

[mmorse60]

Notify DNO

 

[saint]

Its SSE. Is it done on line?

 

[mmorse60]

Yes, you can download their g83 form and then email the necessary info

 

[saint]

nice one thanks

 

[steve Leese]

you could explain to the customer how to get home generation pack for the feed in tariff, then help them fill it in as all my customers have struggled with it. it all helps to get your next job by word of mouth.

 

[Green]

Have you got schematics etc. displayed? Also, make sure the handover pack/manual has everything in it.

Congratulations on your first installation, hope it went well

 

[saint]

Handover manual all sorted. Schematic is a pain to sort.
Job was 4KWp on a slate roof and all went well. On to the next one now.
Cheers

 

[goodwilld]

Saint
Congrats on your first job, have you got my schematic tool????? if not send me your email addy, and i will send it to ya.
D

 

[mmorse60]

Could I possibly have a copy as well [email protected]

Thanks in advance

 

[stubo300]

and me please [email protected]

 

[matchedsparky]

I would be very greatfull as well [email protected]

 

[Philip657]

sorry can i be a pain as well [email protected]

Thanks in advance
phil

 

[JD6400]

If at all possible i would be very great full to receive it as well .
Many thanks Dave [email protected]

 

[Graeme Harrold]

[email protected] for a copy too. Could you not upload for all........

 

[hduz5]

Saint,

How did you find working on a slate roof? Did you rip slates and attach anchors direct to rafters? That was how I was taught but I've seen demos on youtube of large installation companies drilling directly through the slate, placing neoprene between the anchor and slate, and then screwing the anchor through the slate to the rafter.

The jobs I have worked on so far have been on tile roofs so far, interested to hear your experience of working on slate.

Cheers

 

[saint]

Think i've seen that video on You Tube. I used hanger bolts and drilled through the slates. i dont like the slate anchors in the video. More holes and when you screw them down they put a lot of pressure in the tiles.

 

[dek69]

Hi Just finished my first job . Is it possible to have a copy of the schematic tool also. [email protected]

Cheers

 

[ShropshireLad]

Could I also have a copy of the schematic tool please.
[email protected]

Many thanks

 

[s18mcn]

Could i possibly have it too please? [email protected]