Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Discuss first timer in the Industrial Electrician Talk area at ElectriciansForums.net

R

roboloro

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

i'm a lift engineer by trade and qualified as an electrician 3 years ago and have decided to do some private work, my first job is on a building site and its to run power from a neighbours consumer unit to one in a portacabin using swa and in not quite sure what size cable and couplings to use:confused:,it will be buried underground and my run is approx 23 metres does anyone have any suggestions
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below
M

montybaber

  • Thread Starter Thread Starter
  • #2
you need to calculate what load the cable will need to be able to handle what size fuse is backing up this installation?, how is the cabin going to be wired, you also need to take into consideration volt drop and earthing
 
Last edited by a moderator:
R

roboloro

  • Thread Starter Thread Starter
  • #3
thanx i'll give that a try i just found my on site guide so hopefully that can help me out
 
Advertisement - Content continues below

Reply to first timer in the Industrial Electrician Talk area at ElectriciansForums.net

Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Advertisement - Content continues below
Top Bottom