Discuss Garage conversion to habitable space in the The Welcome Forum area at ElectriciansForums.net

gaz

-
Reaction score
0
Hi
I have a garage that I'm converting in to habitable space
I will have electric shower, oven and hob, 2 x electric heaters, microwave, kettle, tv and lights
The cable run from the consumer unit (C/U) is 13-15 meters
What size armoured cable should I use? and what size mcb rating at the C/U
 
Welcome to the forum mate.
These are new circuit, so depending on where you live within the UK, will be part p notifiable work.
Also, I presume you will want this at least to be checked by an electrician, so you get a cert for it. In this case please consult the electrician who will be putting their name to this cert. They will tell you all the info you need.
 
Last edited:
Hi
I have a garage that I'm converting in to habitable space
I will have electric shower, oven and hob, 2 x electric heaters, microwave, kettle, tv and lights
The cable run from the consumer unit (C/U) is 13-15 meters
What size armoured cable should I use? and what size mcb rating at the C/U
as a starting point, i'd be looking at 16mm cable on a 63A breaker, but get a sparks in to verify.there are various factors to consider before deciding.
 
as a starting point, i'd be looking at 16mm cable on a 63A breaker, but get a sparks in to verify.there are various factors to consider before deciding.
Thanks telecrix, that's great for a starting point :)
When you say "various factors" could you give me example please?
 
volt drop, installation method, actual load.
 

Reply to Garage conversion to habitable space in the The Welcome Forum area at ElectriciansForums.net

Similar Threads

  • Locked
My house was built in the 1930s, The fuse in my service cut out is 60Amp and the wire coming from the street has a 16mm2 copper core(easy to see...
Replies
12
Views
554
Hi, I have a Victron Multiplus-II 5kVA inverter/charger with Pylontech US5000 batteries installed in my house along with a 6.8kWp PV array and...
Replies
12
Views
413
Hi guys. I was wondering what size cable and braker I'd need for an electric shower. Just out of intrest am I close in guessing as follows: The...
Replies
19
Views
2K
Hi all, Merry Christmas to everyone, and apologies for talking work during the holidays😅 I have my first EV charger install job early in the New...
Replies
14
Views
2K
Evening everyone . Currently looking at pricing a job up . It’s a hot tub supply . Outside socket with a few spare ways in an outdoor cu . 10mm...
Replies
7
Views
533

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock