I am building an outdoor kitchen and have run a subpanel to the kitchen. I have an arc-fault 20 amp breaker with 4 GFCI WR outlets wired in parallel around the kitchen. They are caulked appropriately, with weather rated covers, etc. but for some reason, every time I try to test the outlet - they always trip - every single one of them.
This leads me to believe there is something wrong with the breaker or I somehow wired the panel/breaker wrong - but the breaker itself NEVER trips - its only the GFCIs that trip simply by plugging something into them.
Any advice on how to debug this would be greatly accepted.
This leads me to believe there is something wrong with the breaker or I somehow wired the panel/breaker wrong - but the breaker itself NEVER trips - its only the GFCIs that trip simply by plugging something into them.
Any advice on how to debug this would be greatly accepted.