SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members

Discuss Help needed please in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

I’ve just completed wiring this packing machine from single to three phase and all is good but can anyone tell me how to load the film to make the bags I’m stumped and need to go home now any pointers would be appreciated
Thanks in advance for even giving it a thought

2F02F85B-C7B4-496E-8DD4-0BC8B9118C16.jpeg

BC6EE2C8-A2EE-43B3-98DF-E071E1B30714.jpeg

82973301-084F-4ABF-8D83-54908525754D.jpeg
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
  • Thread Starter Thread Starter
  • #3
You are right but I wanted to check it worked before handover so I don’t get a call later
 

James

-
Mentor
Arms
Supporter
Esteemed
There is a bit of a nack to loading a fill form seal packing machine
But basically you pull the material down the outside of the vertical pipe.
Then engage the drive belts
Then run a few meters of film through.
It sorts itself as you feed it through
 

Reply to Help needed please in the Electrical Forum area at ElectriciansForums.net

Electrical2Go - Online Electrical Supplier
This official sponsor may provide discounts for members
Top Bottom