Help needed please

[high voltage]

I’ve just completed wiring this packing machine from single to three phase and all is good but can anyone tell me how to load the film to make the bags I’m stumped and need to go home now any pointers would be appreciated
Thanks in advance for even giving it a thought

 

[Pete999]

I’ve just completed wiring this packing machine from single to three phase and all is good but can anyone tell me how to load the film to make the bags I’m stumped and need to go home now any pointers would be appreciated
Thanks in advance for even giving it a thought

View attachment 51225

View attachment 51226

View attachment 51227

all well with the Machine electrically? if yes not your problem is it?

 

[high voltage]

You are right but I wanted to check it worked before handover so I don’t get a call later

 

[Pete999]

You are right but I wanted to check it worked before handover so I don’t get a call later

Not your responsibility HV as long ae the machine electrics are OK invoice and go away.

 

[James]

There is a bit of a nack to loading a fill form seal packing machine
But basically you pull the material down the outside of the vertical pipe.
Then engage the drive belts
Then run a few meters of film through.
It sorts itself as you feed it through