Advertisement - Content continues below
Advertisement - Content continues below

Discuss Help Please - max earth fault Loop Impedance value table needed urgently in the Electrical Forum area at ElectriciansForums.net

D

daz24

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi everyone

Would be really grateful for your help on this.

I have my 1st NICEIC assessment on Monday (am bricking it) - anyhow I only have an old table & I need one like you get on the back of the proper NICEIC pads - the most up to date table.

Has anyone got one they could send me so that I can print it off.

It would be a huge help ! I have been googling & onto the NICEIC website but cant find one.

If you know where I could get one on the internet would also be of help....

Thanks
Daz
 
Advertisement - Content continues below
D

daz24

  • Thread Starter Thread Starter
  • #3
Oops - yes have got one - will have a look !

Just a bit stressed at the moment !

Cheers
Daz
 
W

WarrenG

  • Thread Starter Thread Starter
  • #5
Hi everyone

Would be really grateful for your help on this.

I have my 1st NICEIC assessment on Monday (am bricking it) - anyhow I only have an old table & I need one like you get on the back of the proper NICEIC pads - the most up to date table.

Has anyone got one they could send me so that I can print it off.

It would be a huge help ! I have been googling & onto the NICEIC website but cant find one.

If you know where I could get one on the internet would also be of help....

Thanks
Daz
daz24,

Heres a quick ref table I posted a while back.

http://www.electriciansforums.net/inspection-testing-certification-electrical-installations/2875-earth-loop-impedance-table-17th-edition.html
 
S

Spudnik

  • Thread Starter Thread Starter
  • #6
Remember on the EIC its the MAX value, not corrected value, which are the ones on the NIC pads.
 
B

bahco

  • Thread Starter Thread Starter
  • #7
good luck with your assesment mate let us know how you went on

:)
 
U

uckul

  • Thread Starter Thread Starter
  • #8
hi everybody i am getting my 2391-301 exam very very soon! ( too soon i dont feel i am ready:cry_smile:)
is there any link i could get revision qoustions or even better past exam papers
i had some which already studied them, i feel i need more
please help obi-wan kenobi, you may only help:sunny:
thank you
 
Test Meter - Forum Sponsors since 2007!
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to Help Please - max earth fault Loop Impedance value table needed urgently in the Electrical Forum area at ElectriciansForums.net

Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Advertisement - Content continues below
Top Bottom