Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Discuss Help with a question (R1+R2) in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

N

nutmeg1975

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hello all,

I hope someone can point me in the right direction.

Come across a question today that i am not sure on the answer to.

"What multiplier do you add to R1+R2 to all low temperature increase under fault conditions".

I am not looking for someone to answer this as want to figure this one through myself if possible but would like some help to be pointed in the right direction.

I am thinks along the Ze value or K value.

Any pointers would be very much appreciated. Thanks
 
SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
W

WarrenG

  • Thread Starter Thread Starter
  • #2
Hello all,

I hope someone can point me in the right direction.

Come across a question today that i am not sure on the answer to.

"What multiplier do you add to R1+R2 to all low temperature increase under fault conditions".

I am not looking for someone to answer this as want to figure this one through myself if possible but would like some help to be pointed in the right direction.

I am thinks along the Ze value or K value.

Any pointers would be very much appreciated. Thanks
Ok as you want to go for it yourself - Onsite Guide Table 9A P166

Good luck!

Warren
 
Aico 3000 Range
This official sponsor may provide discounts for members

Reply to Help with a question (R1+R2) in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
Top Bottom