uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members

Discuss help in the Electrical Forum area at ElectriciansForums.net

O

ONIT

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

dose anyone know how too wire up a key switch on emerganice lighting , key switch being next to the board. ( feed,switch feed,perm feed,neutral)

cheers
 
M

michufc

  • Thread Starter Thread Starter
  • #2
dose anyone know how too wire up a key switch on emerganice lighting , key switch being next to the board. ( feed,switch feed,perm feed,neutral)

cheers
hi mate its not something i have come across yet mate but i would imagine you would need a high integrity c/u and hard wire it without a rcd due to the nature of its perpose

hope it helps:)
 
B

bahco

  • Thread Starter Thread Starter
  • #3
havent done one since college but im sure its just a permenant feed from mcb into the switch then feed out into light fitting

cant even remember what markings are on the back of the switch.....

thats what you get doing house bashing for so long lol
 
S

Spudnik

  • Thread Starter Thread Starter
  • #4
Key switches are normally double pole so its line/neutral in, line/neutral out to EM's.

And yes, they will need RCD protection if T&E and normal installation methods are used.

All that the switch will do is, when operated, simulate a loss of power.
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Reply to help in the Electrical Forum area at ElectriciansForums.net

Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Top Bottom