Discuss Hi guys, has anyone got a fix for clipsal saturn series mech on a 2 way light staying dim when off? in the The Welcome Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
1
I have run new cables, segregated the SDI cable running back, so the LED will switch independently and have also installed a capacitor, since I was informed that would be a fix but it bursts light. The picture shows bottom mech with the switch on and bottom mech with the switch off. Thanks so much in advance.
 

Attachments

  • Hi guys, has anyone got a fix for clipsal saturn series mech on a 2 way light staying dim when off? 20211020_113457 - EletriciansForums.net
    20211020_113457.jpg
    259.9 KB · Views: 10
Ah. Ok. You may be better asking on an Oz forum then.
We’re an international forum. Didn’t you get the memo? ?

I’m sure we have other members from down under… just wait and see.


A two way circuit is a two way circuit wherever you are in the world, (except US, where it’s a 3-way) so it might be the old induced voltage with cables running together.

I would have to look up specs of the fitting, as I don’t know what the SDI cable does.
 
We’re an international forum. Didn’t you get the memo? ?

I’m sure we have other members from down under… just wait and see.


A two way circuit is a two way circuit wherever you are in the world, (except US, where it’s a 3-way) so it might be the old induced voltage with cables running together.

I would have to look up specs of the fitting, as I don’t know what the SDI cable does.
The SDI is just so when you turn the light on the LED around the mech is on.
 
I have run new cables, segregated the SDI cable running back, so the LED will switch independently and have also installed a capacitor, since I was informed that would be a fix but it bursts light. The picture shows bottom mech with the switch on and bottom mech with the switch off. Thanks so much in advance.
Hi
Thanks for joining our forum.
Have you managed to fix your issue?
 

Reply to Hi guys, has anyone got a fix for clipsal saturn series mech on a 2 way light staying dim when off? in the The Welcome Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock