Honeywell galaxy 2-12 master

[Justin2211]

Hello people I have a adt non monitored system I am after the master code and engineer code
Mine is playing about and the ex adt guy I have lost his number so can't get hold of him
and yes I know that no one is going to post on an open forum so if someone could help message me thanks
and it's not the default codes I need it's adt ones I think

 

[tazz]

There is no master code, but ADT have their own Engineer code, which you will be very lucky to find out.
The only solution here is a full NVM reset of the system

 

[Justin2211]

Yeah iv tried resetting by a few things iv seen online but they don't work don't really want to rip it out only been in 3 years

 

[tazz]

control panels are fairly cheap....a Texecom, ADE or any other alarm would replace without changing field wiring or detection.

 

[Ross a j]

Having been converted to fibre optic from copper telephone as everyone has to soon I have a comms fault message that requires engineer access for a permanent removal ……. but I only have the manager code .
ADT tell me they cannot supply the engineer code as they no longer hold records .
Local installers tell me they cannot obtain it or by pass the fault or even replace the control panel. They tell me my system is now totally defunct.
I have however found a by pass fix .
Type in your manager code .
Then hit
A … ENT …. ENT …. A … A … ENT

Your alarm is then on full set and working .

Unfortunately without an engineers code you will have to do this every time you want to set it. .

10 keys to hit instead or 1 but you haven’t needed to scrap your alarm !

 

[Ross a j]

Having been converted to fibre optic from copper telephone as everyone has to soon I have a comms fault message that requires engineer access for a permanent removal ……. but I only have the manager code .
ADT tell me they cannot supply the engineer code as they no longer hold records .
Local installers tell me they cannot obtain it or by pass the fault or even replace the control panel. They tell me my system is now totally defunct.
I have however found a by pass fix .
Type in your manager code .
Then hit
A … ENT …. ENT …. A … A … ENT

Your alarm is then on full set and working .

Unfortunately without an engineers code you will have to do this every time you want to set it. .

10 keys to hit instead or 1 but you haven’t needed to scrap your alarm !