How different are the shades of "brushed brass" for Varilight and Knightsbridge?

Discuss How different are the shades of "brushed brass" for Varilight and Knightsbridge? in the Electrical Tools and Products area at ElectriciansForums.net

Share this page

Justcop

Justcop

DIY
Reaction score
0
How different are the shades of "brushed brass" for Varilight and Knightsbridge?

For various reasons I'm planning on using a Varilight switch on one side of the room and Knightsbridge on the other as well as Knightsbridge sockets.

Can anyone who's seen the two products side by side in "brushed brass" tell me if the tones are similar enough for the single Varilight product to not stand out.
 
I would just buy one of each and see if you are happy with the match.
 

Reply to How different are the shades of "brushed brass" for Varilight and Knightsbridge? in the Electrical Tools and Products area at ElectriciansForums.net

Share this page

Similar Threads

Dartlec
Nightmare with Varilight V-Pro (Eclique2) dimmer failures
Having a bit of a nightmare with what should have been a simple job. Back in January I replaced some old Varilight dimmers which had failed after...
Replies
6
Views
1K
Electric Magic
E
M
Testing Feed and Load - 45A oven switch
Hi. I got a new oven the other day and it was working fine. Last night, I swapped out the 45A wall switch for a brushed brass type one. The neon...
Replies
7
Views
2K
MikeDavidson1975
M
S
Compatibility between ceiling fan and speed controller
I have a ceiling fan which currently has a remote control for fan speed and dimming the attached lights. We're currently doing some works in the...
Replies
6
Views
989
Simon47
S
J
Sanity check on plan for CU replacement (MCB to RCBO AFDD)
I'm planning a replacement for my existing domestic CU and would like to have it sanity checked before I get an electrician involved. The main...
2
Replies
33
Views
4K
timhoward
timhoward
ChrizK
Wiring in +/- into car fuse (piggyback)
Once again I am using the Engineering chat as I think my question is more theoretical rather than 'diy advice'. If I am misusing the forum...
Replies
17
Views
1K
mainline
mainline

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock