- Reaction score
- 1
I did a VLF and IR test on my 33kv cable and IR resulted between 80 to 100Mega Ohms on all the phases and VLF between 0.270 to 0.470mA is the cable ok
Discuss I did a VLF and IR test on my 33kv cable and IR resulted between 80 to 100Mega Ohms in the Electrical Engineering Chat area at ElectriciansForums.net
Reply to I did a VLF and IR test on my 33kv cable and IR resulted between 80 to 100Mega Ohms in the Electrical Engineering Chat area at ElectriciansForums.net
Similar Threads
Hi everyone.
Hopefully someone can help with a little mystery i had today. The issue is fixed but I want to understand what was going on to help...
In my line of work it's very rare that I ever have to change a DB. I'm largely in maintenance; occasionally have to add new circuits etc. so in...
Hi all,
Testing question for you.
I'm currently testing an existing domestic installation. The wiring is about 20-25 years old.
We have rewired...
I removed a fuse and before reinserting did the following tests using test lamps. Live side - Neutral = 230V, Dead side - Neutral = 0V, Live side...
I am wiring up a new kitchen and conservatory.
I'm not sure why I checked continuity between line and the metal back box of the light switch, but...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.