Discuss I want to connect 100 led recessed lights to 2 dimming switches. What could I use to do that? in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
- Reaction score
- 25,440
Is that one hundred lights?
yes. I see some dimmers say 450 watts so if I have leds that are 8 watts I can hook up like 50. But I want to do that over 3 dimmers but have 1 dimmer put them all on that wont cost a fortune
- Reaction score
- 25,440
Not that straight forward as that 450w is likely to be for incandescent loads. LEDs do not translate in the same way so a rule of thumb can be used which is for LED loads to divide the incandescent rating of 450w by 10 so this gives you 45w for LED.
Reply to I want to connect 100 led recessed lights to 2 dimming switches. What could I use to do that? in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
Similar Threads
I have 2 lights connected to 1 switch. I installed a led light fixture on one light, it had one red wire and one black wires. It was easy to match...
Hi :)
I'm currently renovating my outbuilding. My electrician has fitted 10 conduit LEDs (that support both leading and trailing edge) and x4...
Hi, I installed 6 recessed lights in my living room. I’m now up to the wiring part of the project. There is an outlet in the room that is...
I have three Aurora Fluorescent linkable (linked) under cabinet 'strip' lights (c.21cm each) under the kitchen cabinets and over the sink area...
Hey all,
I'm not sure if I'm over thinking this, but I can't seem to find the answer to what I believe should be a simple question. I picked up...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.